Made by @adidshaft ↗

Grok Bot is made by SpaceXSI.
Grok Gadgets is an independent project.

↗

Optional C124 source verification

These sources apply only to the optional C124 example. See the first experiment for the delivered YD-ESP32-23 board and SH1106 OLED.

Verified on 4 October 2026 from manufacturer sources:

Detail Value Source
Target AtomS3 Lite, SKU C124; ESP32-S3FN8, 8MB flash, USB-C serial/download M5Stack product documentation
RGB data GPIO35, one pixel M5AtomS3 LedDisplay.h and M5Unified 0.2.5 pin table
User button GPIO41, active-low M5Unified 0.2.5 button sampling cases board_M5AtomS3Lite in setup and update

Firmware uses NeoPixel's supported WS2812 driver and this explicit board header rather than pulling in display/IMU libraries irrelevant to C124. Pin verification is documentation evidence, not physical verification. The product page links to a shared AtomS3 family schematic with display circuitry. Use the explicit C124 manufacturer library to identify its LED/button pins.

RGB_BUILTIN and LED_BUILTIN are GPIO48 in the generic esp32s3 variant and in m5stack_atoms3. C124's RGB data pin is GPIO35 (grok::c124::RgbPin). neopixelWrite(RGB_BUILTIN, ...) drives the wrong pin on this board. The generic LED and button example uses GPIO4 and GPIO0 on purpose and is a different, unverified board.

Source: grok-gadgets-esp32-sdk/docs/board-sources.md